Convertible Top & Exterior Trim
9 guides in this section.
Soft top cleaning & waterproofing
Clean and reproof the MX-5 NB soft top safely, using low-risk cleaning methods and full drying before waterproofing treatment.
- Difficulty:
- Intermediate
- Time:
- 60-120 min
Convertible top frame lubrication
Lubricate Mazda MX-5 NB soft-top frame pivot points safely to reduce squeaks, binding, and long-term wear without contaminating top fabric or seals.
- Difficulty:
- Intermediate
- Time:
- 30-60 min
Drain clearing (ensure proper water flow)
Clear MX-5 NB soft-top drain tubes safely to prevent cabin water ingress, rust acceleration, and repeated carpet moisture.
- Difficulty:
- Intermediate
- Time:
- 30-75 min
Soft top inspection & minor repair (seams, window, straps)
Inspect Mazda MX-5 NB soft tops for seam/window/strap issues, apply conservative minor repairs, and decide when full top replacement is the safer path.
- Difficulty:
- Intermediate
- Time:
- 60-150 min
Soft top replacement
Replace the Mazda MX-5 NB soft top with an NB-focused, leak-prevention-first process emphasizing rain rail integrity, drain path checks, and careful tension/alignment.
- Difficulty:
- Advanced
- Time:
- 6-12 hours
Rain rail inspection & replacement
Inspect and replace the Mazda MX-5 NB rain rail to prevent rear-cabin water ingress, with careful drain verification and leak-path confirmation before final reassembly.
- Difficulty:
- Advanced
- Time:
- 3-8 hours
Hardtop latch & seal maintenance (if equipped)
Maintain Mazda MX-5 NB hardtop latches, seals, and defroster connector interfaces to reduce wind noise, prevent water ingress, and avoid connector damage.
- Difficulty:
- Intermediate
- Time:
- 45-120 min
Weatherstrip cleaning & conditioning (doors/windows/top seals)
Clean and condition Mazda MX-5 NB weatherstrips (door, window, and top-contact seals) to reduce noise, improve sealing, and catch leak causes early.
- Difficulty:
- Beginner
- Time:
- 30-75 min
Window regulator lubrication & glass adjustment
Inspect/lubricate NB window regulator tracks and diagnose glass-to-top seal alignment before escalating to regulator replacement or door-glass adjustment.
- Difficulty:
- Intermediate
- Time:
- 60-150 min